|
How to use
Carefully read the instructions leaflet contained in the tube of XTRABYLIA ® COLOR. Always apply to dry unwashed hair. Do not use metallic mixing bowls. Wear appropriate gloves.
Description
Preliminary analysis: - identify the natural depth of colour or the depth of the colour treated hair; - choose the desired colour; - prepare the mixture XTRABYLIA® COLOR, with the appropriate XTRABYLIA® Oxyd XTRABYLIA® Oxyd; - 10 vol. (3%) for pastel colouring on decoloured hair; - 20 vol. (6%) for same depth colouring, or lightening 1 tone; - 30 vol. (9%) for lightening 1 - 2 tones - 40 vol. (12%) for lightening 2-4 tones, 4-5 tones for the high lift colours. - toncolor has the function of fixing the colour, without lifting.
|
Treatment |
Result |
Mix-ing |
Oxyd |
Dev.Time:
Mins |
Levels of lightening |
|
Permanent Colour |
Covers 100% whith hair, long lasting colour result |
1:1,5 |
10-20 Vol.
30-40 Vol. |
30’/40’ |
1-4 |
|
High lits |
Colour results aree reliable to target colour |
1:2
|
40 Vol.
|
40'/50'
|
4-5
|
|
Tone on Tone
|
Covers 70% white hair Cosmetic colour result |
1:2
|
Toncolor
|
20'/30'
|
- |
|
Color Bath
|
Masks White hair. Revives the tone and reflex on natural hair or between two applications of permanent colour
|
1:3
|
Toncolor
|
5'/15'
|
- |
First application on natural hair: phase 1: apply the mixture on the lengths and ends. DEVELOPMENT TIME: 15 - 20 minutes. phase 2: prepare a new mixture and apply to the roots. DEVELOPMENT TIME: 20 - 25 minutes. TOTAL DEVELOPMENT TIME 35-45 minutes. Application to re colour the re growth phase 1 : apply part of the mixture to the re growth. I DEVELOPMENT TIME: 20-25 minutes. phase 2: distribute the remaining colour mixture on the lengths and ends. DEVELOPMENT TIME: 10-15 minutes. TOTAL DEVELOPMENT TIME 30 - 40 minutes. If the re growth is longer than 5 cm It is advisable to follow the instructions as in "First application on natural hair". All processing times are indicative and may be varied based on the structure of the hair. Rinsing and Massage. delicately massage without adding water. Gradually add a small amount of water, emulsioning well the product from the scalp in all areas of the head. Rinse well and proceed to the balancing after colour treatment. After Colour Treatment to rebalance the physiological pH of the hair and scalp REP-HAIR RELAX SHAMPOO + REP-HAIR MASK Correctors: the Correctors are intensive colours idealised to modulate, reinforce and intensify colours from the XTRABYLIA® colour range. The lighter the hair depth, the less Corrector needs to be added to the colour being applied. The quantity of Correctors to be added, varies according to the intensity of colour required. The Corrector Red may be used also as a pre pigment or For re pigmenting the hair. The Corrector Blue neutralises unwanted orange tones, the Violet neutralises Yellow and the Blue and Yellow Correctors mixed together, create a green as a neutraliser in the case of unwanted red tones. The Silver Corrector and in fact all the Correctors, are ideal when mixed with XTRABYLIA® Oxyd and applied to decoloured hair to create extreme colouring effects. The Correctors offer the professional hairdresser the instrument to fuel the fantasy and creativity. Clear Corrector is a cream designed to mix with all the shades to modulate the depth of tone by one half to one full tone or level. The quantity of product needed varies according to the hairdresser to personalize his/her work. This cream is also ideal when applied to the lengths and ends of hair which are resistant to colour, hair which is dull and lifeless due to excessive use of colouring treatments. Rinsing and Massage. Delicately massage without adding water. Gradually add a small amount of water emulsioning well the product from the scalp, in all areas of the head. Rinse well and proceed to the balancing after colour treatment. After Colour Treatment to rebalance me physiological pH of the hair and scalp REP-HAIR RELAX SHAMPOO + REP-HAIR MASK Warning. The product has been formulated and controlled in order to reduce risks from its use for both the client and consumer. Owing to its composition it is recommended that the following warnings are read carefully before using the product so as to avoid any risk or problems. It is a product for professional use only. It may cause an allergic reaction. A skin patch test is highly recommended. The product must not be used to colour eyebrows or eyelashes. If the product comes into contact with either the skin or eyes, rinse off well with plenty of water. If the irritation persists consult a specialist. Hair must be rinsed off well after application. Do not apply on to irritated scalps or scalps with pathologies such as eczema, psoriasis. During application, rinsing and shampooing protective disposable plastic (polythene) gloves must be worn; skin must be protected with a barrier cream. Keep the product out of the reach of children. Before each application read and follow the instructions carefully. Mixing must be carried out in a well-ventilated environment. As soon as the mixture has been prepared it must be used. Left-over product must be thrown away and must not be re-used. The mixture must never be left in a closed container. The product may stain skin temporarily, it may stain material, walls and other surfaces permanently. Rinse off immediately if the product comes into contact with clothes or other surfaces. The recommended processing times must not be exceeded. Apply the product in a well-ventilated environment. The different shades may contain the following substances which could cause irritation or allergic reactions: phenylenediamines, toluenediamines, alpha-naphthol, resorcinol, ammonia. The product must not be used if there is intolerance to one or more of the above listed components. Read the list of components which appears on the box. Code of practice for the hairdresser regarding obligations towards the client. It is the hairdresser/haircolourist's duty to inform the client about the possible side-effects of the application and about the possible risks of allergic reactions. However, the decision whether or not to have the skin patch test is up to the client and, if it is carried out to decide whether or not to proceed with the application. Instruction for the skin patch test. Its aim is to test the skin's tolerance to the product. Clean a small area either behind the ear or on the fore-arm with alcohol. Apply to the prepared area of the skin, a small quantity of mixed colour product (XTRABYLIA® Color + XTRABYLIA® Oxyd or XTRABYLIA® Toncolor). Apply the mixture to the chosen area using either a cotton swab or a spatula. Repeat the application two or three times and leave to dry. Do not wash off, leave on for 48 hours, then rinse off carefully. If, at the end of the 48 hours, there should be signs of irritation, inflammation or itching it is highly advisable not to apply the product owing to the high risk of allergic reactions. Advice for the correct handling professional products. Continuous exposure to cleaning agents, due to professional use (soaps, shampoos, detergents etc...), deteriorates the natural protective skin layer. Alteration of this barrier leaves the skin of the hands even more exposed to external agents. These conditions, if the product is handled without due precautions, could give rise to the sensitivity processes that in the long run, could take on more serious forms. We therefore believe it advisable to point out some standards of good practice: Hair colour and perms: • when applying barrier creams, use disposable plastic gloves (polyethylene) well-fitting and high up the forearm during the handling, application and rinsing phases; • If the product comes into accidental contact with the skin or eyes, immediately and abundantly rinse the parts concerned with water; • during preventive and periodic health visits, perform the sensitivity test relative to the compounds that may give allergic reactions as specified in the warnings for the use of the product employed. Decolorant powders: • when applying barrier creams, use disposable plastic gloves (polyethylene), well-fitting and high up the forearm, during the handling, application and rinsing phases; • when measuring out the product, avoid creating dust in the atmosphere which, if inhaled, may cause bronchial irritation; • If the product accidentally comes into contact with the skin or eyes, it is advisable to immediately and abundantly rinse with water. The areas in which the product is used must be well ventilated throughout the working day in order to remove air from inside the workplace and eliminate stagnation of powders and vapours. Strictly follow the suggestions and recommendations specific to the compounds that by law are indicated on the product label and the correct method of use of the same.
Exclusively classified product for professional hairdressing, hairstylists and aesthetic beauty salons.
|